top of page

EMF (Electromagnetic Field) meters are commonly used in ghost hunting and paranormal investigations to detect fluctuations in electromagnetic fields, which are believed to be associated with paranormal activity. Here are some tips for using EMF meters effectively in ghost hunting:

  • Choose a Quality EMF Meter:

    • Select an EMF meter designed for paranormal investigations, preferably one with a wide detection range and adjustable sensitivity settings.

    • Look for EMF meters that can measure both AC (alternating current) and DC (direct current) electromagnetic fields.

  • Understand Baseline Readings:

    • Before starting your investigation, take baseline readings of the electromagnetic field in the area. This helps establish normal EMF levels and identifies any environmental sources of electromagnetic interference (such as electrical wiring, appliances, or electronic devices).

  • Use in Conjunction with Other Tools:

    • EMF meters are most effective when used alongside other investigative tools, such as digital voice recorders, infrared cameras, and temperature sensors. Correlating data from multiple sources can provide a more comprehensive picture of paranormal activity.

  • Pay Attention to Fluctuations:

    • During the investigation, monitor the EMF meter for sudden or unexplained fluctuations in electromagnetic fields. These fluctuations could indicate potential paranormal activity, especially if they occur in conjunction with other phenomena.

  • Rule Out Environmental Factors:

    • Be aware of environmental factors that can cause false readings on EMF meters, such as power lines, electrical appliances, radio frequency interference, and strong magnetic fields.

    • Move the EMF meter around and check for consistent readings to rule out natural causes of electromagnetic fluctuations.

  • Document Findings:

    • Record all EMF readings, including the time, location, and any notable fluctuations observed during the investigation.

    • Note any correlations between EMF fluctuations and other paranormal phenomena experienced or recorded during the investigation.

  • Analyze and Interpret Results:

    • After the investigation, analyze the EMF data alongside other evidence gathered during the ghost hunt.

    • Look for patterns or correlations between EMF fluctuations and reported paranormal activity. Consider factors such as timing, location, and intensity of EMF fluctuations.

  • Seek Expert Input:

    • Share your EMF data and findings with experienced investigators or researchers in the paranormal field. Get their input and analysis to validate your observations and interpretations.

 

By following these guidelines and using EMF meters responsibly and in conjunction with other investigative techniques, you can enhance your ghost hunting efforts and potentially gather compelling evidence of paranormal activity.

EMF METERS

Various EMF Meters Used In Paranormal Investigating

Mel-8704R-REM EMF Mel Meter with Automatic Temperature Deviation Detection (ATDD)

ghost_PNG17.png
  • REM Function - alerts of changes in the surrounding energy field

  • ATDD - Automatic Temperature Deviation Detection - Sound and Light Alert for every 5 Degree F Temperature Change

  • AC and DC EMF Detection with Digital Readout

  • Ambient Temperature in Digital format

  • Nightvision Friendly Red Readout and High Intensity Built-in Flashlight

Mel-8704R-REM EMF Mel Meter_edited_edite

We approach paranormal investigating from a scientific perspective, and the Mel REM ATDD takes a science-based approach to ghost hunting. This EMF Meter can detect both EMF fields as well as changes in the surrounding temperature to show the presence of a ghost.

Automatic temperature deviation detection (ATDD) detects temperature changes +5 and -5 with a rising or descending tone. The changes in EMF field will be detected by 6 different levels which are indicated by the LED lights to show the strength and the extent of the disturbance. The Mel ATDD has a built-in mini telescopic antenna which radiates its own EMF field around itself. Also, the Mel ATDD has the functions of the basic Mel Meter.

 

The device offers a precise digital display of AC EMF levels and includes an EMF Burst mode. In this mode, the temperature function is deactivated, allowing all power to be dedicated to EMF detection for quick sampling of EMFs, comparable to the speed of the K2 meter. When the temperature function is activated, the Mel Meter has the capability to store high and low readings of the digital EMF temperature display, as well as measure the ambient temperature in both Fahrenheit and Celsius.

LED KII EMF Meter Ghost Hunting Paranormal Research Meter

ghost_PNG17.png
  • Instantaneous response to EMF fluctuations & spikes. 9 Volt batteries required

  • Easy to read LED light scale in dark and sunshine

  • Portable, easy to use, rugged, reliable, super responsive

  • UV reactive color label

  • Used for Paranormal Research and for general EMF detection use

LED KII EMF Meter

Electromagnetic fields, known as EMFs, are produced by various electrical devices. These fields can be found in appliances, cell phones, electrical wiring, and even the human body. The K-II EMF Meter is designed to measure these fields, enabling users to pinpoint devices with high emissions and make educated choices about reducing exposure. Fluctuations in EMFs have been linked to areas where mysterious events, such as supposed hauntings, have been documented. The K-II is powered by a single 9V battery and displays EMF readings across five milliGauss ranges.

The K2 EMF meter is a versatile tool that can detect electromagnetic fields (EMF) within a frequency range of 50-20,000 Hz with an accuracy of 5% at 50-60 Hz. This device is ideal for both Paranormal Research and for identifying potentially harmful high EMF levels in your home or workplace. Its compact size allows for easy portability, ensuring that you are always prepared to take readings. The meter comes equipped with a high-quality 9V battery that offers long-lasting power. Operating the device is simple - just click to turn it on and click again to turn it off. While the UV reactive label is a new and interesting feature, it is not essential for viewing the detected EMF levels. Additionally, the colored LED lights provide clear readings that are easily visible in both daylight and darkness.

ghost_PNG17.png

TriField EMF Meter TF2 Detects Radio, Magnetic & Electric Fields for 5G, Cell Towers and Bluetooth

  • Detects all three types of EMF pollution: Magnetic, Electric, and Radio/Microwave

  • Displays field signal level, peak level, and a fast indicator bar for RF Pulse monitoring

  • Measures 4G and 5G cell phones, cell towers, WiFi routers, Bluetooth, AC Powerlines, and Smart Meters

  • Dual Mode: Standard or Weighted Frequency Responses

  • Manufactured in USA by AlphaLab, Inc.

TriField EMF Meter

The TriField EMF Meter Model TF2 serves as an AC gaussmeter, AC electric field meter, and radio power density meter all in one device. It is equipped with all the necessary features for precise and efficient measurements of electromagnetic fields (EMF). In addition to the standard AC measurement modes, a unique frequency weighted mode is available to accurately scale the magnetic and electric measurements, providing a comprehensive view of the currents generated by each type of field within the human body. 

Magnetic (“MAG”) Fields: Turn the knob to Standard MAG or Weighted MAG. In a typical home or office with low EMF, living areas will read 3.0 milligauss or less on Standard MAG and 5.0 milligauss or less on weighted.

Electric (“ELEC”) fields: In an electromagnetically quiet home or office, both Standard and Weighted will read less than 50 V/m, but the reading may be higher when the meter is pointed toward fluorescent lights, a wall outlet or switch plate, or an improperly-grounded appliance.

Radio/Microwave ("RF") Fields: This meter reads RF and microwaves in the frequency range 20 MHz to 6 GHz. This includes most new 5G installations, but not experimental millimeter wave 5G. 

ghost_PNG17.png

CD Rechargeable Digital EMF Meter for Office, Outdoor and Ghost Hunting

  • Built-in EMF radiation sensor, which can display the radiation value on the clear LCD digital display

  • When the testing result exceeds the value(0.4µT (4mG) or 40V/m), the screen will turn red and the indicator will be flashing, and the buzzer will alarm

  • Multifunctional applications

  • Lifetime Technical Support from ERICKHILL

LCD Rechargeable Hand-Held Digital EMF Meter for Office, Outdoor and Ghost Hunting_edited.

The LCD Rechargeable Hand-Held Digital EMF Meter has two uses, to test the magnetic field and electric field. When the testing result exceeds value (0.4µT (4mG) or 40V/m), the screen will turn red, the indicator will be flashing, and the buzzer will alarm. If you are testing some quiet areas, you can close the buzzer first, avoid disturbing the others.

Operate with one hand and move or make field measurements. Automatically shuts down after 5 minutes without operation. Mainly used for testing TV, computer, printer, microwave oven, refrigerator, cell tower, for low-frequency home appliances, and ghost hunting.

ERICKHILL customer service strives to create a professional and high-quality meter. They provide a 35-month after-sale service, lifetime technical support. If you have any questions, please feel free to contact them, as their professional after-sales team will help you solve any problem.

bottom of page